Weather station 3D for print
1815 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Early development state of a weather station you can print with your 3D printer
For the Anemometer you... need three half table tennis balls, two ball bearings, a threared rod, some screw nuts, one magnet and one hall sensor. There are holes for mounting the Hall Sensor PCB
For the tipping bucket rain gauge you need one magnet and one Hall sensor (there is no mounting yet)
http://www.femoral.de
Designer
Femoral3d model description
Early development state of a weather stationEarly development state of a weather station you can print with your 3D printer
For the Anemometer you... need three half table tennis balls, two ball bearings, a threared rod, some screw nuts, one magnet and one hall sensor. There are holes for mounting the Hall Sensor PCB
For the tipping bucket rain gauge you need one magnet and one Hall sensor (there is no mounting yet)
http://www.femoral.de
