Wall-e foldable 3D for print
1369 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
If you sign up as a new member at fab365.net and leave a comment with your registered account email address, you will receive a "F...ree Item - Download Ticket" that can be used at Fab365!
When you sign up for fab365.net, you will receive one “Free Item - Download Ticket” immediately, and you can receive one more by leaving a comment here.
Since Fab365 designed the Foldable Robot, there have been many requests to design the Wall-E in a foldable way. This is because Wall-E is optimized for foldable design. However, the shape optimized for foldable is only the body, and Wall-E's head/eyes, arms, wheels and track are a challenging shape with many factors to consider.
Now that we too have gained a lot of experience, we now have the skills to create, and finally we can design like this.
Please enjoy the foldable design skills that Fab365 has accumulated over the past 3 years with the Foldable Wall-E.
Here are some things to keep in mind when making Foldable Wall-E.
When folding the body, make sure to check the positions of the protrusions and holes before folding.
The parts attached to the upper corner of the Wall-E's body have a small adhesive area, so it is recommended to apply the adhesive carefully before sticking.
The neck must first be pushed up and then rotated before it can move.
The arm moves along the rail. On the lower rail, it moves well when the arm is forward, and on the upper rail, it moves well along the rail when raised up.
To make the track move well, it's a good idea to grease the wheels with sewing machine oil.
If the tracks are well separated, it is helpful to increase the flow rate.
Largest part in printing, size = X 160mm, Y 184mm, Z 25mm
Designer
Gucati3d model description
Get Free Ticket!If you sign up as a new member at fab365.net and leave a comment with your registered account email address, you will receive a "F...ree Item - Download Ticket" that can be used at Fab365!
When you sign up for fab365.net, you will receive one “Free Item - Download Ticket” immediately, and you can receive one more by leaving a comment here.
Since Fab365 designed the Foldable Robot, there have been many requests to design the Wall-E in a foldable way. This is because Wall-E is optimized for foldable design. However, the shape optimized for foldable is only the body, and Wall-E's head/eyes, arms, wheels and track are a challenging shape with many factors to consider.
Now that we too have gained a lot of experience, we now have the skills to create, and finally we can design like this.
Please enjoy the foldable design skills that Fab365 has accumulated over the past 3 years with the Foldable Wall-E.
Here are some things to keep in mind when making Foldable Wall-E.
When folding the body, make sure to check the positions of the protrusions and holes before folding.
The parts attached to the upper corner of the Wall-E's body have a small adhesive area, so it is recommended to apply the adhesive carefully before sticking.
The neck must first be pushed up and then rotated before it can move.
The arm moves along the rail. On the lower rail, it moves well when the arm is forward, and on the upper rail, it moves well along the rail when raised up.
To make the track move well, it's a good idea to grease the wheels with sewing machine oil.
If the tracks are well separated, it is helpful to increase the flow rate.
Largest part in printing, size = X 160mm, Y 184mm, Z 25mm
