Safety glasses holder - wall-mount 3D for print
2965 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
The OpenSCAD model is parametric, with a parameter for the number of glasses. I found some...thing similar (http://www.thingiverse.com/thing:878657/), but it was too large for my printer, and was only an STL, so I decided to make a parametric one, and it was influenced by that design. Note that the design has holes for 3 screws, but because I didn't have many screws lying around, I only used 2 (one into the wall stud).
Designer
excite3d model description
Holds several pairs of safety glasses or other eyeglassesThe OpenSCAD model is parametric, with a parameter for the number of glasses. I found some...thing similar (http://www.thingiverse.com/thing:878657/), but it was too large for my printer, and was only an STL, so I decided to make a parametric one, and it was influenced by that design. Note that the design has holes for 3 screws, but because I didn't have many screws lying around, I only used 2 (one into the wall stud).
