Rick sanchez [rick and morty] 3D for print
![Rick sanchez [rick and morty] 3d model for 3d printers](https://www.3dforprint.com/modelos/609/rick-sanchez-rick-and-morty1_medium.png)
![Rick sanchez [rick and morty] 3d model for 3d printers](https://www.3dforprint.com/modelos/609/rick-sanchez-rick-and-morty1_thumb.png)
![Rick sanchez [rick and morty] 3d model for 3d printers](https://www.3dforprint.com/modelos/609/rick-sanchez-rick-and-morty4_thumb.png)
![Rick sanchez [rick and morty] 3d model for 3d printers](https://www.3dforprint.com/modelos/609/rick-sanchez-rick-and-morty2_thumb.png)
![Rick sanchez [rick and morty] 3d model for 3d printers](https://www.3dforprint.com/modelos/609/rick-sanchez-rick-and-morty5_thumb.png)
![Rick sanchez [rick and morty] 3d model for 3d printers](https://www.3dforprint.com/modelos/609/rick-sanchez-rick-and-morty3_thumb.png)
5043 Views 2 Likes 16 Downloads Download the piece here from 3dforprint
Any fans of Rick and Morty out there? I hope so because today I bring you Rick Sanchez. He's just in a standing pose, holding a... flask, and having a dull, not interested look on his face.
I created the model in ZBrush Core. This is actually the first full model I've done in this program, so it was quite the learning experience.
Then my wife painted it using filler primer, followed by some acrylic paints and then topped the whole thing off with a clear coat.
Watch here: https://youtu.be/R97du7G9WG4
Printer: XYZprinting Da Vinci 1.0 Pro
Filament: Hatchbox PLA
Layer Height: 0.1mm
Infill: 20%
Supports/Raft: Yes...
Designer
CHAOSCORETECH3d model description
3D model descriptionAny fans of Rick and Morty out there? I hope so because today I bring you Rick Sanchez. He's just in a standing pose, holding a... flask, and having a dull, not interested look on his face.
I created the model in ZBrush Core. This is actually the first full model I've done in this program, so it was quite the learning experience.
Then my wife painted it using filler primer, followed by some acrylic paints and then topped the whole thing off with a clear coat.
Watch here: https://youtu.be/R97du7G9WG4
3d model print parameters
Print Settings:Printer: XYZprinting Da Vinci 1.0 Pro
Filament: Hatchbox PLA
Layer Height: 0.1mm
Infill: 20%
Supports/Raft: Yes...
