Knife sharpener system 3D for print
6774 Views 2 Likes 20 Downloads Download the piece here from 3dforprint
WARNING!!! Parts are NOT oriented to print. Turn them around to find the best way..., designed to be printed without supports! If part having a text on it - turn this side up.
UPDATE: Table clamp is not working the way indended, So I've deleted its parts.
UPDATE2: Finally checked extensively - it works well, except:
1. The parts (lansky_top & lansky_bottom) can't hold the blade very tight - I use insulation tape on the blade to get more friction.
2. You have to change sandpaper pretty often, but this way it is always fresh and straight unlike sanding stones.
Designer
MonZon3d model description
Almost fully printable knife sharpening system, inspired by Lansky.WARNING!!! Parts are NOT oriented to print. Turn them around to find the best way..., designed to be printed without supports! If part having a text on it - turn this side up.
UPDATE: Table clamp is not working the way indended, So I've deleted its parts.
UPDATE2: Finally checked extensively - it works well, except:
1. The parts (lansky_top & lansky_bottom) can't hold the blade very tight - I use insulation tape on the blade to get more friction.
2. You have to change sandpaper pretty often, but this way it is always fresh and straight unlike sanding stones.
