Iron man mk iii helmet 3D for print
10985 Views 2 Likes 7 Downloads Download the piece here from 3dforprint
I did NOT make these models, I only reoriented them for printing with minimal suppo...rt. This helmet was modelled by drumguy560 from therpf.com. A huge thanks to him for modelling this magnificent helmet!
For the original files and scaling, please go here: http://www.therpf.com/showthread.php?t=189853
Materials and methods
Printed with PLA. there are only 3 parts which require some support, the rest can be printed without.
The parts that need support are:
- V3helmet Middle1.2
- V3helmet Top1
- V3jaw1
I used superglue to join the pieces together. For a nice surface finish i recommend some kind of filler and lots of sanding!
Designer
timo3d model description
Full size Iron Man Helmet optimized for minimal support material.I did NOT make these models, I only reoriented them for printing with minimal suppo...rt. This helmet was modelled by drumguy560 from therpf.com. A huge thanks to him for modelling this magnificent helmet!
For the original files and scaling, please go here: http://www.therpf.com/showthread.php?t=189853
Materials and methods
Printed with PLA. there are only 3 parts which require some support, the rest can be printed without.
The parts that need support are:
- V3helmet Middle1.2
- V3helmet Top1
- V3jaw1
I used superglue to join the pieces together. For a nice surface finish i recommend some kind of filler and lots of sanding!
