Hydroponic net pot / planter 3D for print
1940 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Made this to show a friend that these can be printed nicely without support, so instead of making it round ...like most designs i made it 10-sided to make all bridges straight instead of arced, and added a slight taper to the top edge.
No supports needed!
Designer
Erik Cederberg3d model description
a ~45mm dia / 60mm height hydroponic pot.Made this to show a friend that these can be printed nicely without support, so instead of making it round ...like most designs i made it 10-sided to make all bridges straight instead of arced, and added a slight taper to the top edge.
No supports needed!
