Fat happy sitting pot 3D for print
7038 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Pot has more rigid arms, legs and shoes! Pot is also now rounded.
To print this, no supports are requi...red and it sits flat on the print bed.
To get the finish in the photo, sand it down to 600 grit, apply filler primer, sand down to 2000 grit, apply paint, and finally a top coat of lacquer.
In response to a comment below, a 'trimmed' version has been uploaded which takes the bottom 0.5mm off for slightly easier printing and ensuring a flat base.
Print Settings
Printer:
Biqu B1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1mm
Infill:
10%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA
Designer
Donny Wong3d model description
Inspired by Happy Sitting Pot by Lukki15.Pot has more rigid arms, legs and shoes! Pot is also now rounded.
To print this, no supports are requi...red and it sits flat on the print bed.
To get the finish in the photo, sand it down to 600 grit, apply filler primer, sand down to 2000 grit, apply paint, and finally a top coat of lacquer.
In response to a comment below, a 'trimmed' version has been uploaded which takes the bottom 0.5mm off for slightly easier printing and ensuring a flat base.
Print Settings
Printer:
Biqu B1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1mm
Infill:
10%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA
