Customizable earring stand 3D for print
7707 Views 2 Likes 6 Downloads Download the piece here from 3dforprint
You can cus...tomize the lenght of the hangers if you want them shorter, or can print them longer. Also you can adjust the spacing between the holes and the radius of the holes.
Print hanger.stl three times, or 3x_hangers.stl once.
Then just plug the hangers into the stands and you are done....
Designer
STYLESUXX3d model description
This is an earring stand for longer earrings. The stand was designed by a friend in Freehand and I just linear extruded them in openScad.You can cus...tomize the lenght of the hangers if you want them shorter, or can print them longer. Also you can adjust the spacing between the holes and the radius of the holes.
3d model print parameters
Print stand.stl two times.Print hanger.stl three times, or 3x_hangers.stl once.
Then just plug the hangers into the stands and you are done....
